Front Range Bricks Repair

Chimney bricks fail mainly because of moisture and temperature changes. Water enters small pores in the brick and mortar. When temperatures drop, that moisture freezes and expands. This creates pressure inside the brick and causes cracking, flaking, and surface loss. Over time, repeated freeze thaw cycles break the brick down from the inside. Poor mortar, missing caps, damaged crowns, and failed flashing all speed up this process by allowing more water into the structure.

Yes. If damage is limited to specific areas, individual bricks can be removed and replaced without rebuilding the chimney. This is common when only a section of the chimney has been exposed to heavy moisture or when mortar failure caused localized damage. Replacing bricks early helps preserve the rest of the chimney and avoids larger structural repairs later.

Surface flaking and shallow chips are often early signs of moisture damage. Deep cracks, loose bricks, missing sections, or movement in the chimney indicate structural concerns. If bricks can be moved by hand or pieces are falling off, the damage is no longer cosmetic. An inspection is the only way to determine how far the damage extends beneath the surface.

Yes. Once bricks begin to fail, nearby bricks absorb more moisture and stress. Damage spreads outward and downward through the chimney. Mortar joints weaken, additional bricks begin to crack, and the structure loses strength. What starts as a small repair can turn into a rebuild if ignored.

We select replacement bricks that closely match the size, color, and texture of the existing chimney. While weathered brick may look slightly different at first, repairs blend in over time. The priority is restoring strength and stability while keeping the appearance as consistent as possible.

Brick repair stops water from entering through damaged masonry, but it works best when combined with other protective measures. Chimney caps, crown repair, flashing seal work, and proper mortar all help keep water away from the brick surface. During inspection, we explain if additional protection is needed to prevent repeat damage.